Cumulus Junior 250 – first impressions

I’ve been looking for a dedicated sleeping bag for my youngest daughter. She’s two years old, and I have bought cheap Aegismax quilts and sleeping bags for the rest of the family. But since C is a lot smaller, and basically the only family member that likes to join me in the woods (Outside of car camping), I thought I’d get her a dedicated kids sleeping bag.

The Cumulus Junior comes in two versions, the 150 and the 250, which states how much down it has in it. They both come with 700cuin down as standard. The 250 has a comfort temperature of 9°C. The fabric is made from 35g/m2 Pertex Quantum. I prefer the thicker 35g/m2 to the 27g/m2 that I have in my Quilt 350. Especially since it’ll be used by a kid that might not go so easy on the gear.

I made a custom order of the 250 with 850cuin down. This gives it an estimated comfort temperature of 5°C, according to Cumulus. With a thick fleece base layer I think it’ll be ok down to freezing. She has always slept really good outside, in her stroller, with just a thick base layer and a knitted wool blanket. I could also bring the Aegismax Wind Hard Tiny as an extra layer over the sleeping bag for insurance.

img_0501

Since it was a custom order it took a few weeks for it to arrive. As with my other products from Cumulus it has a feeling of high quality, and it lofts up fine. There is a tag on the baffle along the zipper that states the cuin of the down. It comes with a small stuff sack, and a larger mesh storage bag.img_0490img_0491

In the foot end there’s a draw cord. You could stuff the lower end of the sleeping bag into itself, and close the draw cord. That way you get a shorter sleeping bag, with less air to heat up, that is suitable for smaller children.

img_0492

Cumulus Junior 250

The weight of the sleeping bag is 520g. It suitable for kids up to 140cm.

As it is now I’m just waiting for the temperature to warm up a bit before I bring C along again. Winter still holds a firm grip of Sweden, and night temps dropped down to -16°C just a few nights ago. I don’t want to risk exposing her to those temps, and give her memories of he outdoors as the place where you’d freeze your ass off.

Hilleberg Enan, first impressions

I’m finally back in Sweden and at last I could get my hands on my newest purchase, the Hilleberg Enan. I bought the 2016-version with V-pegs and the stronger (but heavier) Kerlon 1000 fabric.

This will not be a review but merely my first thoughts of it, as I’ve only done a test-pitch.

WP_20160719_10_27_48_Pro
The tent and the foot-print

When I first unpacked the box with the tent and the foot-print I was surprised how dark the green in the flysheet was. The bag, made by the same material, looked almost black. The tent came in one bag, and the foot-print in another bag. I plan to keep the footprint on at all times, and therefor flipped the tent over, and attached the foot-print.

WP_20160719_10_35_10_Pro
The tent laid out, with the foot-print just attached

I pitched the tent as the instructionvideo tell you to do it. It was easy to set it up. I was kind of in a hurry, so I didn’t have time to fine-tune it. The was an information-booklet included with lots of pictures showing the complete pitching-process. But if you’ve pitched a tunnel-tent before it really isn’t a big deal.

WP_20160719_10_56_03_Pro
The tent fully pitched
WP_20160719_10_57_03_Pro
Inner-tent with the mesh door, and the vestibule with the foot-print

As I said I was in a hurry so I just had time to set the tent up, and then put it down again. But first impressions are good. It seems like a solid tent. The flyshet feels thin as a butterfly-wing, but I’ve done a tear-test on a sample of the fabric, and it is really tough. I can’t wait to try this tent for real. Due to work I probably wont have the time for a hike until the first weekend in august. But I’ll update when I’ve tried the tent for real.